Weston Pasta Maker 01 0201 User Manual

ASSEMBLY  
Attachment Clips  
1. To attach the Pasta  
Machine to the table or  
countertop position the  
Pasta Machine near the  
edge of the work surface.  
Pasta Machine Attachment  
Attachment Clips  
Traditional Style  
Pasta Machine Attachments  
Pasta Machine  
Attachment Drive Hole  
ALL SOLD SEPARATELY  
2. Silde the C-Clamp into  
the C-Clamp Hole in the  
side of the Pasta Machine  
.
Roller Drive  
Hole  
Traditional Style Pasta Machine  
Square Ravioli Attachment (50mm)  
Angel Hair Attachment (1mm)  
Spaghetti Noodle Attachment (2mm)  
Linguini Attachment (3mm)  
01-0201  
01-0209  
01-0202  
01-0203  
01-0204  
01-0206  
Handle  
3. Tighten the screw on  
the C-Clamp to secure the  
Pasta Machine to the table  
or countertop.  
Lasagna Attachment (50mm wide)  
Lasagnette Attachment (12mm wide) 01-0205  
Half Moon Ravioli Attachment (50mm) 01-0208  
C-Clamp Hole  
4. Slide  
the  
Cutter  
C-Clamp  
Attachment onto the  
attachment clip of the  
Pasta Machine.  
These products and many more products can be ordered by visiting  
W e s t o n P r o d u c t s . c o m or by calling  
Weston Products LLC Toll Free at 1-800-814-4895  
Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131  
5. Slide the Handle into the Drive Hole of the Roller or the Attachment to be used.  
Be sure to notice when the Handle turns, it passes below the edge of the work surface  
and turns freely.  
Specific instructions on the use of each Pasta Machine Attachment is included in  
the Pasta Machine Instruction Book.  
For questions or further instructions, contact  
Weston Products at 1-800-814-4895.  
CLEANING  
The Pasta Machine Attachments may have some excess oil on it from the factory. This  
is to protect the machine during shipping. THIS OIL MUST BE REMOVED BEFORE  
USING THE MACHINE!  
ATTENTION!  
If any components of this unit are broken, do not operate properly, or for product returns, please  
contact Weston Products LLC  
Phone: 1-800-814-4895 (Outside the U.S. 440-638-3131)  
20365 Progress Drive, Strongsville, Ohio 44149  
.
Using a clean dry cloth, wipe all the surfaces clean. DO NOT USE WATER! Never  
WestonProducts.com  
wash the Pasta Machine Attachment with water, place it in water, or put it into the  
All Trademarks and Registered Trademarks are property of the respective companies.  
dishwasher. Simply wipe it clean with a dry cloth.  
.
SAVE THESE INSTRUCTIONS!  
To clean the inner surfaces of the Pasta Machine Attachment pass a piece  
Refer to them often and use them to instruct others.  
of dough through the Cutters several times, making sure the dough touches all the  
surfaces, especially the sides where machine oil can accumulate. Discard this dough  
when finished.  
FOR WARRANTY INFORMATION, Log onto  
.
Use a dry pastry brush to remove any flour or bits of dough from the hard to reach  
places.  
.
Lightly sprinkle some flour on the Cutters. Using a dry brush, work the flour into  
the edges of the Pasta Machine Attachment. Brush all the flour away and wipe the  
machine clean again with a clean, dry cloth.  
.
NEVER INSERT KNIVES BETWEEN THE CUTTERS!  
 

Weider Home Gym WEBE09910 User Manual
Westcott Camera Accessories 1871 User Manual
Whirlpool Oven GBS307PRB00 User Manual
Whirlpool Pressure Washer W10607415B User Manual
Wibur Curtis Company Coffeemaker D500GTH User Manual
Woodstock Drill M1039 User Manual
Worth Data Barcode Reader 701 RF User Manual
Xantrex Technology Portable Generator 300 C User Manual
Zanussi Refrigerator Z 98 4 W User Manual
Zanussi Ventilation Hood 641257 User Manual